techniques.html: It is usually okay to use a standard macro name like BOOST_PP_DEF for this kind of code because the macro is both defined and undefined in the immediate site of its use. I was really confused by the use of the word "standard". This would be clearer: It is usually okay to reuse a single generic macro name like BOOST_PP_DEF throughout your code because the macro is both defined and undefined very close to its point of use. Although I don't know why you'd want to advocate that over using a descriptive name. ------ A clearer divider between examples would be a *huge* help visually. An <hr> would be enough, for example. Example - Use BOOST_PP_EMPTY as an unused parameter in local macro instantiations. #define BOOST_PP_DEF(cv) /* ... */ \ template<class base> \ cv() typename implement_subscript_using_begin_subscript<base>::value_type& \ implement_subscript_using_begin_subscript<base>::operator[](index_type i) cv() { \ return base::begin()[i]; \ } \ /**/ ?? Where is BOOST_PP_EMPTY used in this example? I think I know what you mean, but really, you need to show it! How: BOOST_PP_EMPTY() expands to nothing and can be used as an unused parameter. Note: BOOST_PP_EMPTY with the () never gets expanded. This sounds self-contradictory. Just above you said it expands (to nothing)! The () is necessary to invoke a function-like macro. No duh; I think stating the obvious that way only adds confusion. Caveat: You cannot safely use concatenation while using BOOST_PP_EMPTY(). That's way too vague and general. I certainly can use concatenation and BOOST_PP_EMPTY "together", for many reasonable definitions of that word! I think you need to be more specific, or strike it. ------ The BOOST_PP_ENUM_PARAMS example could benefit greatly from a side-by-side format in a table showing the expansion on the right. In fact, that would help all the examples, but in particular if you're just getting acquainted with the library at this point you may not have any idea what some of those macros do. You're advocating that people use them here, but unless the reader has some idea of what they generate, it's lost on her. Showing not-even-correct details of BOOST_PP_REPEAT's implementation doesn't help here. I'd strike it. Furthermore, BOOST_PP_ENUM_PARAMS and its variations use BOOST_PP_REPEAT. BOOST_PP_COMMA_IF(I) expands to a comma if I != 0. BOOST_PP_INC(I) essentially expands to "I+1," and BOOST_PP_DEC(I) essentially expands to "I-1.". I'd strike that too. You haven't said a word about BOOST_PP_INC/DEC yet, so the reader is left wondering why you're giving their implementation details. ----- Example - Use BOOST_PP_REPEAT and a token look-up function to eliminate categorical repetition. Is this really better than iterating over a SEQ of categories in any way other than efficiency? ----- Example - Use BOOST_PP_REPEAT to avoid O(n*n) repetition. It's unclear to me how that example avoids O(n*n) repetition. It certainly seems to have that complexity, and that appears to be intrinsic to the code it generates. Maybe you mean Example - Use BOOST_PP_REPEAT for O(n*n) repetition. Or something? ----- BOOST_PP_IF enables convenient generation of lists using BOOST_PP_REPEAT. This statement, without an example, is too vague to be helpful. ----- Implementation details of BOOST_PP_IF don't help: How: BOOST_PP_IF is defined for the entire repeat range (psuedo code): #define BOOST_PP_IF(c, THEN, ELSE) BOOST_PP_IF ## c(THEN, ELSE) #define BOOST_PP_IF0(THEN, ELSE) ELSE #define BOOST_PP_IF1(THEN, ELSE) THEN #define BOOST_PP_IF1(THEN, ELSE) THEN ^ especially since they appear to be wrong. I think the point is that BOOST_PP_IF works on first arguments other than 0 or 1. If so, you should just say that it works on numeric arguments up to N (whatever N is). --------- Example: Use arithmetic, logical, and comparison operations when necessary. With no commentary, and no generated code, this example is really useless. I mean, of course you'd use arithmetic, logical, and comparison operations "when neccessary". -- Dave Abrahams Boost Consulting http://www.boost-consulting.com
"David Abrahams" <dave@boost-consulting.com> wrote in message news:uaczb9y4f.fsf@boost-consulting.com...
[...] It is usually okay to reuse a single generic macro name like BOOST_PP_DEF throughout your code because the macro is both defined and undefined very close to its point of use.
Yeah, this would make a lot more sense. I was just looking over the docs the other day too, and gave up because it was taking too long to grok.
[...] ?? Where is BOOST_PP_EMPTY used in this example? I think I know what you mean, but really, you need to show it!
Yup. You did better than me. I didn't even see the BOOST_PP_EMPTY.
[...] The BOOST_PP_ENUM_PARAMS example could benefit greatly from a side-by-side format in a table showing the expansion on the right. In fact, that would help all the examples,
YES! I could not agree with this more!!! It's hard enough getting one's head around the PP lib without having to be an expert in it already.
[...] BOOST_PP_IF enables convenient generation of lists using BOOST_PP_REPEAT.
This statement, without an example, is too vague to be helpful.
Yes, many more examples, please. Also, am I the only one who finds the sparse frame-based layout to be a little counter-intuitive? Would it be possible to make the docs look a little more Boost-like?
[...] Example: Use arithmetic, logical, and comparison operations when necessary.
With no commentary, and no generated code, this example is really useless. I mean, of course you'd use arithmetic, logical, and comparison operations "when neccessary".
I didn't get that either. It's a shame, because there's a lot of code that would benefit from the PP lib that almost certainly isn't because of the difficult learning curve. Good documentation would go a long way towards making it more usable. Dave --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.701 / Virus Database: 458 - Release Date: 6/7/2004
-----Original Message----- [mailto:boost-bounces@lists.boost.org] On Behalf Of David B. Held
"David Abrahams" <dave@boost-consulting.com> wrote in message news:uaczb9y4f.fsf@boost-consulting.com...
[...] It is usually okay to reuse a single generic macro name like BOOST_PP_DEF throughout your code because the macro is both defined and undefined very close to its point of use.
Yeah, this would make a lot more sense. I was just looking over the docs the other day too, and gave up because it was taking too long to grok.
It takes more than a day to get used to the pp-lib. It takes much more than a day to get used to preprocessor metaprogramming--which is what you are doing every time that you use the pp-lib. It is an entirely different form of programming.
[...] ?? Where is BOOST_PP_EMPTY used in this example? I think I know what you mean, but really, you need to show it!
Yup. You did better than me. I didn't even see the BOOST_PP_EMPTY.
This was an error, probably on my part, the example should be something like: #define QUALIFIER(cv) cv() QUALIFIER( BOOST_PP_EMPTY ) // nothing QUALIFIER( BOOST_PP_IDENTITY(const) ) // const That is what it is referring to--abstraction of "emptiness" and more generally--programmatic emptiness.
[...] The BOOST_PP_ENUM_PARAMS example could benefit greatly from a side-by-side format in a table showing the expansion on the right. In fact, that would help all the examples,
YES! I could not agree with this more!!! It's hard enough getting one's head around the PP lib without having to be an expert in it already.
All of the examples (except the ones in this page) do have the results. Apparently, these did too, but I missed them when I copied the page.
[...] BOOST_PP_IF enables convenient generation of lists using BOOST_PP_REPEAT.
This statement, without an example, is too vague to be helpful.
Yes, many more examples, please.
There are a great many examples. For instance, almost all (if not all--I can't remember) library primitives have accompanying examples.
Also, am I the only one who finds the sparse frame-based layout to be a little counter-intuitive?
It is a reference tool intended to adequately support those developers that are already familiar with the library--that is the purpose of the layout.
Would it be possible to make the docs look a little more Boost-like?
Frankly, I find the Boost-like format to be suboptimal both in style and navigation--it achieves a lowest common denominator worthy of Netscape Gold--which is unnecessary. I'm not saying that the pp-lib docs look good--because they don't without the fonts fixed--but navigation is much easier and much more direct. Other documentation, such as Spirit's docs and Python's "Tutorial Introduction" are much more pleasing to the eye and much more professional. However, I know that some people's focus is on utilitarian presentation. The next iteration of the pp-lib's documentation will be entirely generated and that format can be generated just as easily as any other.
[...] Example: Use arithmetic, logical, and comparison operations when necessary.
With no commentary, and no generated code, this example is really useless. I mean, of course you'd use arithmetic, logical, and comparison operations "when neccessary".
I didn't get that either. It's a shame, because there's a lot of code that would benefit from the PP lib that almost certainly isn't because of the difficult learning curve.
The difficult learning curve is never going to go away. It is an alien environment that is contrary to most forms of programming. That takes time to become familiar with.
Good documentation would go a long way towards making it more usable.
More usable for what? I ask this simply to determine perspective. The documentation is never going to tell you what you can and cannot do with the preprocessor or what you should and should not do with the preprocessor--those are all unbounded sets. The most that the documentation can do is tell you what the _library_ can do and give a few examples. Take ENUM_PARAMS for example, an extremely common use of this primitive is to generate stuff like "class T0, class T1, class T2". However, the library doesn't have a single primitive that generates that string of preprocessing tokens--it only has the general form. It could just as easily generate "0.1, 0.2, 0.3". The point is that the output is a function of the combination of primitives, user-defined macros, and input. The library takes the role of a programming language. As such, it is never going to answer questions like "what things can I do with 'if'?" and "what things can I do with 'while'?". The library really is that low-level. ENUM_PARAMS is about the most underlying-language-oriented primitive in the entire library. There is definitely room for improvement, but I suspect that no matter how much I improve the docs and no matter how many examples that I add, I'm always going to hear the same old argument--the learning curve is too steep. That argument is based on the assumption that documentation (etc.) is enough to reduce every learning curve to a gentle slope--which is naive. The library is hard to learn because the library is different than anything that most programmers have been exposed to and because the many of the techniques and idioms used are different than those used in every other language and in computer science in general. It isn't simple, and it can't be made to be simple. *But* it can be better... Regards, Paul Mensonides
"Paul Mensonides" <pmenso57@comcast.net> writes:
Also, am I the only one who finds the sparse frame-based layout to be a little counter-intuitive?
It is a reference tool intended to adequately support those developers that are already familiar with the library--that is the purpose of the layout.
Which begs the question of how anyone is supposed to get familiar in the first place without personal help from you. Speaking as one of those who followed that route and is now reasonably familiar, the layout isn't even very good for us. The big blank space at the beginning and the lack of lines around the frames are disconcerting, but more importantly, the reference pane lumps every macro together at the same level instead of categorizing them and progressively revealing detail. It would be a big help, for example, to have a view that simply hid all of the names with _Z _R or _D suffixes.
Would it be possible to make the docs look a little more Boost-like?
Frankly, I find the Boost-like format to be suboptimal both in style and navigation--it achieves a lowest common denominator worthy of Netscape Gold--which is unnecessary.
I tend to agree.
I'm not saying that the pp-lib docs look good--because they don't without the fonts fixed--but navigation is much easier and much more direct.
It's pretty good, but the reference is much too "flat". If you really want to help the familiar programmer, you'll use all of the hierarchical levels you have for a categorized reference. The parts that familiar programmers mostly don't need to look at are currently sucking up all those convenient navigational abilities.
Other documentation, such as Spirit's docs and Python's "Tutorial Introduction" are much more pleasing to the eye and much more professional.
I'd say they're very accessible but not particularly professional. They have a "chatty", almost dumbed-down (that's too pejorative a word, but couldn't find another) feel about them. They're also very "flat". Many people find the "original iMac case" background disconcerting.
I didn't get that either. It's a shame, because there's a lot of code that would benefit from the PP lib that almost certainly isn't because of the difficult learning curve.
The difficult learning curve is never going to go away.
Mostly because you believe it can't.
It is an alien environment that is contrary to most forms of programming. That takes time to become familiar with.
That's absolutely true, but most people don't need to get far enough along on the curve to get to the part where it really *has* to be difficult. I didn't get started with C++ by studying the overload resolution rules, did you? I still don't know many of the subtleties, and yet I get plenty of useful work done; I even write and call overloaded functions on a daily basis.
Good documentation would go a long way towards making it more usable.
More usable for what?
Weren't you the one who was frustrated by people asking "what can the PP lib be used for?" ;-)
I ask this simply to determine perspective. The documentation is never going to tell you what you can and cannot do with the preprocessor or what you should and should not do with the preprocessor--those are all unbounded sets.
Paul, your ability to move from the specific to the general is awesome; it's part of what makes you such a great programmer. Your unwillingness to go in the other direction is a liability, though, at least for your users. The PP lib is really only very well-suited to algorithmic and pattern-based C/C++ code generation. You probably could build a program that analyzes english sentences in PP language, but other languages are much better suited to AI research.
The most that the documentation can do is tell you what the _library_ can do and give a few examples.
It can describe the kinds of jobs the library is well-suited to.
Take ENUM_PARAMS for example, an extremely common use of this primitive is to generate stuff like "class T0, class T1, class T2". However, the library doesn't have a single primitive that generates that string of preprocessing tokens--it only has the general form. It could just as easily generate "0.1, 0.2, 0.3".
And you think that's hard to explain in a way that's simple, yet captures the generality of ENUM_PARAMS?
The point is that the output is a function of the combination of primitives, user-defined macros, and input. The library takes the role of a programming language. As such, it is never going to answer questions like "what things can I do with 'if'?" and "what things can I do with 'while'?".
I don't know why you obsess over questions like that. I don't think anyone expects anything other than a reasonable answer to them. For example, "BOOST_PP_IF selects between two sequences of preprocessing tokens based on an integral-valued argument" (roughly speaking).
The library really is that low-level. ENUM_PARAMS is about the most underlying-language-oriented primitive in the entire library. There is definitely room for improvement, but I suspect that no matter how much I improve the docs and no matter how many examples that I add, I'm always going to hear the same old argument--the learning curve is too steep.
As long as you insist that it's impossible to (or people shouldn't) use the library without an in-depth understanding of the fundamental operation of the PP, that will be a self-fulfilling prophecy.
That argument is based on the assumption that documentation (etc.) is enough to reduce every learning curve to a gentle slope--which is naive. The library is hard to learn
It doesn't matter whether the library is hard to learn. It matters whether it's hard to learn _to use_. Right now, that's the case. Most people learn much more effectively incrementally, and in layers. The current docs, for all intents and purposes, dump the whole library on you at once.
because the library is different than anything that most programmers have been exposed to and because the many of the techniques and idioms used are different than those used in every other language and in computer science in general. It isn't simple, and it can't be made to be simple.
Sure the whole picture can't be made simple, but enough of it can be made simple that people could get a whole lot more useful work done without handholding from you. With some sense of mastery under their belts on that basis, they would be much more inclined to delve deeper, not least because it would seem easier. -- Dave Abrahams Boost Consulting http://www.boost-consulting.com
David Abrahams <dave@boost-consulting.com> writes:
It's pretty good, but the reference is much too "flat". If you really want to help the familiar programmer, you'll use all of the hierarchical levels you have for a categorized reference. The parts that familiar programmers mostly don't need to look at are currently sucking up all those convenient navigational abilities.
Wow, I just discovered the "headers" view seems to give me almost everything I need. I've seen it before, but it never occurred to me to use that as my main "reference" when there's another index with that label. -- Dave Abrahams Boost Consulting http://www.boost-consulting.com
David Abrahams wrote:
David Abrahams <dave@boost-consulting.com> writes:
It's pretty good, but the reference is much too "flat". If you really want to help the familiar programmer, you'll use all of the hierarchical levels you have for a categorized reference. The parts that familiar programmers mostly don't need to look at are currently sucking up all those convenient navigational abilities.
Wow, I just discovered the "headers" view seems to give me almost everything I need. I've seen it before, but it never occurred to me to use that as my main "reference" when there's another index with that label.
My amusement knows no end.
-----Original Message----- From: boost-bounces@lists.boost.org [mailto:boost-bounces@lists.boost.org] On Behalf Of David Abrahams
It is a reference tool intended to adequately support those developers that are already familiar with the library--that is the purpose of the layout.
Which begs the question of how anyone is supposed to get familiar in the first place without personal help from you.
By actually reading the documentation. All the necessary information is there--though not all the information that could be there. The documentation is certainly not ideal, but every interface in the library is documented and fairly easy to use if you actually read the documentation. The primary thing that the documentation lacks is a sort of categorical index with a broad overview of the types of primitives that the library contains.
Speaking as one of those who followed that route and is now reasonably familiar, the layout isn't even very good for us. The big blank space at the beginning and the lack of lines around the frames are disconcerting, but more importantly, the reference pane lumps every macro together at the same level instead of categorizing them and progressively revealing detail. It would be a big help, for example, to have a view that simply hid all of the names with _Z _R or _D suffixes.
I would do that, except that scripting is disallowed by Boost policy and the current documentation is hand written--that will change. Regarding the usability of the documentation as a reference... From the initial starting point, it takes all of two clicks to find the documentation for any primitive in the library.
I'm not saying that the pp-lib docs look good--because they don't without the fonts fixed--but navigation is much easier and much more direct.
It's pretty good, but the reference is much too "flat". If you really want to help the familiar programmer, you'll use all of the hierarchical levels you have for a categorized reference. The parts that familiar programmers mostly don't need to look at are currently sucking up all those convenient navigational abilities.
What hierarchal levels are you referring to here? Directory structure (i.e. broad categorization)? Doing such a thing would only add to the length of the path from start to finish of a particular primitive.
Other documentation, such as Spirit's docs and Python's "Tutorial Introduction" are much more pleasing to the eye and much more professional.
I'd say they're very accessible but not particularly professional. They have a "chatty", almost dumbed-down (that's too pejorative a word, but couldn't find another) feel about them. They're also very "flat". Many people find the "original iMac case" background disconcerting.
I'm not saying that they are top-of-the-line, just that they are "more professional" looking than the standard HTML 1.0 docs. Personally, I dislike anything that ties the format to a particular look--mainly because what I'd prefer is likely to be different than many others--but also because of the separation of content and presentation. However, without scripting or other more advanced features, we'd have to do that in advance and publish a specific one. That is still better, but only from the documentation-writer's point of view. Further, XML is a terribly wordy and boilerplate-ridden source format. Minor formatting can be changed through stylesheets, but major formatting changes require a new XSL transformation entirely. None of these problems are unsolveable, but they get worse and worse the more general purpose the schema is for documentation of a variety of different forms.
I didn't get that either. It's a shame, because there's a lot of code that would benefit from the PP lib that almost certainly isn't because of the difficult learning curve.
The difficult learning curve is never going to go away.
Mostly because you believe it can't.
No, mostly because of the nature of the subject. I'm not saying that it can't be easier than it is. I'm saying that it can't be simple.
It is an alien environment that is contrary to most forms of programming. That takes time to become familiar with.
That's absolutely true, but most people don't need to get far enough along on the curve to get to the part where it really *has* to be difficult.
The primitives of the library, barring a relative few, are easy to use, and their documentation is easy to follow. That is not where the learning curve is steep. Rather it is how to apply the primitives available to solve problems. That requires lateral thought--and that is what makes the learning curve steep. There is no one-to-one mapping between some particular primitive and some particular problem to be solved. "Lateral thought" is, for example, when you have A and B from which you conceive the abstract possibility of C. SFINAE, and enable_if specifically, is a good example. It takes lateral thought to go from type deduction failure to manual overload/specialization selection. That kind of application is certainly not always necessary to use the pp-lib for trivial tasks, but it is necessary to use the pp-lib well in non-trivial tasks. This is no different than C++ or any other programming language, which has a large array of features whose intersection makes C++ complex (and also interesting). The difference is that a great deal of literature exists on programming paradigms in computer science and various languages, but none exist for the language that is the preprocessor--and by extension, preprocessor libraries--which is fundamentally different in many ways (even procedural abstraction doesn't exist).
I didn't get started with C++ by studying the overload resolution rules, did you? I still don't know many of the subtleties, and yet I get plenty of useful work done; I even write and call overloaded functions on a daily basis.
Yes, but you also didn't start writing C++ code by reading the documentation for template metaprogramming library X. You likely started with some book about C++ itself.
Good documentation would go a long way towards making it more usable.
More usable for what?
Weren't you the one who was frustrated by people asking "what can the PP lib be used for?" ;-)
That is precisely the point of the rhetorical question the following exposition.
I ask this simply to determine perspective. The documentation is never going to tell you what you can and cannot do with the preprocessor or what you should and should not do with the preprocessor--those are all unbounded sets.
Paul, your ability to move from the specific to the general is awesome; it's part of what makes you such a great programmer. Your unwillingness to go in the other direction is a liability, though, at least for your users.
I am not at all unwilling to go the other direction. I am simply stating a fact: there is a many-to-many relationship between the primitives of the library and the problems that they combine to solve. I cannot answer the question, "What types of things is the pp-lib good for?", because the answer is an unbounded set. I can present only a finite set of such solutions as examples and present the building blocks from which any given solution in the unbounded set can be derived as needed.
The PP lib is really only very well-suited to algorithmic and pattern-based C/C++ code generation.
Nevertheless that is still all-encompassing. In order to do X, you often have to do Y which is in many cases outside of the particular field of X.
You probably could build a program that analyzes english sentences in PP language, but other languages are much better suited to AI research.
Agreed. However, the uses of the pp-lib within Boost itself barely touch the potential--it just represents a subset of problems which developers happened to come in contact with.
The most that the documentation can do is tell you what the _library_ can do and give a few examples.
It can describe the kinds of jobs the library is well-suited to.
The library is well-suited to these kinds of jobs: repetition, looping, recursion, and control flow. It isn't more suited to generating arity expansions, which is the typical Boost usage, than many other possible uses within those extremely broad "kinds of jobs".
Take ENUM_PARAMS for example, an extremely common use of this primitive is to generate stuff like "class T0, class T1, class T2". However, the library doesn't have a single primitive that generates that string of preprocessing tokens--it only has the general form. It could just as easily generate "0.1, 0.2, 0.3".
And you think that's hard to explain in a way that's simple, yet captures the generality of ENUM_PARAMS?
No, it isn't hard to explain ENUM_PARAMS. It is hard to explain when and where one should use ENUM_PARAMS except for a few very specific situations. Of all the constructs in the library, that one is also the easiest to explain as a mapping between primitive and solution because it is the closest to the underlying language.
The point is that the output is a function of the combination of primitives, user-defined macros, and input. The library takes the role of a programming language. As such, it is never going to answer questions like "what things can I do with 'if'?" and "what things can I do with 'while'?".
I don't know why you obsess over questions like that. I don't think anyone expects anything other than a reasonable answer to them. For example, "BOOST_PP_IF selects between two sequences of preprocessing tokens based on an integral-valued argument" (roughly speaking).
And this documentation is already there.
The library really is that low-level. ENUM_PARAMS is about the most underlying-language-oriented primitive in the entire library. There is definitely room for improvement, but I suspect that no matter how much I improve the docs and no matter how many examples that I add, I'm always going to hear the same old argument--the learning curve is too steep.
As long as you insist that it's impossible to (or people shouldn't) use the library without an in-depth understanding of the fundamental operation of the PP, that will be a self-fulfilling prophecy.
I didn't say that an in-depth understanding is required. I said only that the learning curve is steep because it is a different programming language with a different programming model than any existing language--and because that programming model doesn't have several decades worth of research, experience, and literature.
That argument is based on the assumption that documentation (etc.) is enough to reduce every learning curve to a gentle slope--which is naive. The library is hard to learn
It doesn't matter whether the library is hard to learn. It matters whether it's hard to learn _to use_. Right now, that's the case.
I am not talking about how the library itself is implemented; I'm talking about how the library is applied.
Most people learn much more effectively incrementally, and in layers. The current docs, for all intents and purposes, dump the whole library on you at once.
That is true, but that is also because the library is not incremental. It is a collection of relatively low-level primitives that you can combine to do interesting and worthwhile things. Yes, these could be categorized in a more explicit fashion, but that is nothing compared to the combinatorial explosion of documentation resulting from attempting to document the abstract perception of element C (from above). In nearly every case, single library primitives are not particularly useful without others used in concert to achieve some effect.
because the library is different than anything that most programmers have been exposed to and because the many of the techniques and idioms used are different than those used in every other language and in computer science in general. It isn't simple, and it can't be made to be simple.
Sure the whole picture can't be made simple, but enough of it can be made simple that people could get a whole lot more useful work done without handholding from you.
I'm not talking about the whole picture. I'm talking about how to apply the pp-lib, not how it is implemented and especially not about preprocessor metaprogramming in general. Take something as simple as IF, it isn't really good for anything useful unless it is used in some larger practical example. Sure I can document IF as an isolated entity and provide simplistic examples of its use, but that doesn't really show how or why IF should be used or why it's actually useful at all. Sure I can provide larger practical examples, but then the learning curve dramatically steepens because much more information is required to be processed at once (i.e. the use of many more primitives and techniques as well as semi-common fields like generic programming) in order to understand why the example is better than various other alternatives.
With some sense of mastery under their belts on that basis, they would be much more inclined to delve deeper, not least because it would seem easier.
Given initiative, one can learn how to use the preprocessor library. How many people that have complained about the documentation have actually read through the entire documentation and tried the examples, etc.? The goal of learning how to use the pp-lib is eminently achievable, but you have to invest the time required to be reasonably comfortable a different language and a different way of looking at source code. Regards, Paul Mensonides
participants (1)
-
David Abrahams -
David B. Held -
Eddie Diener -
Paul Mensonides